How to Fix Nighthawk Router Not Connecting to Internet?
How to Fix Nighthawk Router Not Connecting to Internet?
Blog Article
Are you having trouble with your Nighthawk router not connecting to internet? Don't worry, there are a few simple actions that can usually remedy this frequent problem. This short troubleshooting instruction will assist you in getting your Nighthawk back up.
- Verify the Modem Connection: Make sure there is a steady internet connection to your modem. Use an Ethernet cable to connect a device directly to the internet; if there is no internet, your ISP, not the router, is the problem.
- Reboot Everything: Turn off and on your computer, router, and modem. Plug the modem in first after unplugging the router and modem for at least 30 seconds. Turn on the router when all of the lights have stabilized.
- Check Cable Connections: Make sure every Ethernet cable is securely connected. The modem should be connected to the router's WAN/Internet port.
- Update Firmware: Issues with connection may arise from outdated firmware. Go to http://www.routerlogin.net to access the Nighthawk web interface, then select Advanced > Administration > Firmware Update to see if there are any firmware upgrades available.
- Verify Router Settings: misconfigured configurations, such as misconfigured DNS or static IPs, might occasionally prevent access. To auto-configure your connection, either run the Nighthawk app's setup procedure again or reset the settings to their original values.
- Factory Reset: Hold down the reset button on the router's back for ten seconds, if all else fails. Only do this if nothing else works since it will remove all settings.
No internet yet? To make sure there are no configuration requirements or service outages, get in touch with your ISP. Despite their strength, Nighthawk routers require periodic maintenance, just like any other piece of technology. Report this page